켐산 Chemsan


용량 (Qty) : 100ml


식품의 제조, 가공용 기구, 장비등을 세척하는 제품으로, 인산을 기반으로 표면 살균&세척해줍니다.

물과 희석후 기구등을 담가 놓거나, 분무기에 담아 기구등에 뿌려 사용합니다.


* 2분동안 짧은 접촉시간

* 무취제품

* 5리터 물에 10ml 켐산을 희석합니다.


Note : 이 제품은 유통기한 설정 제외 상품입니다. 제품 뚜껑을 오픈하고 1년이내 사용하는것을 권장합니다.


>> 물과 희석해 놓은 상태에서는, 약 1주일정도 까지만 사용을 권장합니다.

( pH 3 이상인 경우는 새로 제품을 희석해서 사용해주세요.)



사용 방법 및 보관

켐산 10ml를 수돗물 5 리터에 희석합니다. (희석비율: 500배)

기구, 장비등을 희석된 물에 담그거나, 분무기 사용, 부드러운 천으로 닦아준후 약 2분정도 방치합니다. 이후 음용에 적합한물로 헹궈어 마무리 합니다. 반드시 안내된 희석비율과 방법을 숙지후 사용합니다.



( 아래 부분을 누르면, 왼쪽 상단으로 용액이 올라갑니다. 100ml 사이즈는 위 사진과같이 왼쪽 상단에 가득 담겼을때 5ml입니다. )


이 제품은 산성 특성으로 인해 연금속에 사용은 권장되지 않습니다.

사용후 보관시 용기를 완전히 밀봉하고 직사광선을 피해 서늘한 곳에 보관해야 합니다.



용도 : 식품의 제조.가공용 기구등 세척용
성분 : 인산, 알킬벤젠설폰산, 이소프로필알콜, 정제수
제조사 : Chemisphere UK ltd    원산지: 영국
위생용품의 유형 : 3종 세척제

Chemsan (Safety Data Sheet)


ChemSan

- Acid cleaner for brewing
- Self-foaming surface sanitising
- Not affected by organic soils

How to use : 
0.2%. Dilute 10ml of Chemsan to 5liters of water. Apply to surface via immersion, spray or clean cloth. Minimum contact time 2 minutes. The solution should remain at a pH at 3 or below to maintain proper sanitizing level. If you mix the product with your tap water and it turns cludy, then the pH may be too high, or the mineral composition of your water is affecting the product. In this case we recommend you use bottled mineral water. Rinse equipment after cleaning. 

Q&A : 
What is Chemsan?
Chemsan is an acid cleaner for brewing and surface sanitising.
What is it the dilution rate?
Chemsan should be diluted at 0.2% or 10ml to 5 litres of water. 
What is it the minimum contact time?
The minimum contact time to be effective is 2 minutes. 
Once the solution has been made up can I continue to use over several days?
Yes you can but before use check that the pH of the solution is 3 or below. If it is higher than this then make up a fresh dilution. 
How long does diluted Chemsan last for once is has been made up?
Chemsan will remain effective for many days once made up provided the pH of the solution remain at 3 or less.
The diluted Chemsan is cloudy, is this a problem?
No it is perfectly fine. Chemsan will go cloudy if it has been diluted with hard water. This is because the calcium and magnesium carbonates in the water react with the
Chemsan and produce a cloudy precipitation. Provided the pH of the solution is 3 or less the diluted Chemsan will still be effective.
My Chemsan foams up, is this right?
Yes it is! Chemsan does foam which helps it cling and sanitise surfaces.
What is the best temperature for Chemsan?
Chemsan is typically used at ambient temperature but can be used from ambient up to 88°C. Higher temperatures may reduce the required contact/soak time.


사용시 주의 사항

1) 직접 마시지않고, 눈, 피부, 옷에 접촉되지 않도록 한다.

2) 사용전 반드시 개인 보호장비 (고글, 장갑, 마스크등)을 착용하시고 사용하시기 바랍니다. 

3) 세척제를  사용한 후에는 음식기, 조리기구등에 세척제가 잔류하지 않도록 음용에 적합한물로 씻어야한다.

4) 세척제를 사용하는 경우에는 용도이외로 사용하거나, 규정 사용량 이상을 사용하여서는 아니된다.

5) 다른 제품을 섞어서 사용하지 마십시오.

6) 1종, 2종 세척제 목적으로 사용하여서는 아니된다. 

7) 어린이의 손이 닿지 않는곳에 보관하십시오.


응급처치

다량을 마신경우 물을 충분히 마시고, 눈에 들어갔을경우 다량의 물로 씻어준 다음, 의사와 상의하십시오.
흡입시에는 신선한 공기가 있는곳으로 이동합니다.