2) 사용전 반드시 개인 보호장비 (고글, 장갑, 마스크등)을 착용하시고 사용하시기 바랍니다.
3) 세척제를 사용한 후에는 음식기, 조리기구등에 세척제가 잔류하지 않도록 음용에 적합한물로 씻어야한다.
4) 세척제를 사용하는 경우에는 용도이외로 사용하거나, 규정 사용량 이상을 사용하여서는 아니된다.
5) 다른 제품을 섞어서 사용하지 마십시오.
6) 1종, 2종 세척제 목적으로 사용하여서는 아니된다.
7) 어린이의 손이 닿지 않는곳에 보관하십시오.
응급처치
다량을 마신경우 물을 충분히 마시고, 눈에 들어갔을경우 다량의 물로 씻어준 다음, 의사와 상의하십시오.
흡입시에는 신선한 공기가 있는곳으로 이동합니다.
Chemclean (Powder) 2.5 kg
A very effective alkaline cleaner
Effective on Stainless steel, soft metals, Plastic and glass
Excellent results in hard and soft water
Can be used hot (up to 60°C) or cold
Removes protein soils, stains, carbon and fatty acids
How to use :
Dilution: 50g per 5 litres of water for manual cleaning. 50g per 20 litres of water for soaking.
Dosage may be increased up to 5% dependant on soil conditions.
Preparation: Before cleaning remove as much loose soil as possible by rinsing off equipment
and vessels.
Manual Cleaning: Scrub all surfaces with the cleaning solution until all surfaces are clean.
Circulation Cleaning: Use 50g per 20 litres of water for fermenters, kegs, tanks, and other
equipment. Circulate for 30 minutes at up to 60°C. Dilution and circulation time may need to
be adjusted dependant on soil load.
Soaking: Ensure all equipment to be cleaned is fully immersed. Soak for 4 hours at up to 60°C
or allow to soak cold overnight. Thoroughly rinse equipment after cleaning. The solution can
be reused during the cleaning process. Do not use on Teflon coated surfaces.
Q&A
What is Chemclean?
Chemclean is an alkaline cleaner
Where can I use Chemclean?
Chemclean is very effective on stainless steel, soft metals, plastics and glass.
Can Chemclean be used in hard water areas?
Yes, Chemclean can be used with hard or soft water.
Are there any materials I cannot use Chemclean?
Do not use on Teffon coated equipment.
What is it the dilution rate?
For manual cleaning use 50g per 5 litres of water, for soaking use 50g per 20 litres of water. Dosage may be increased up to 5% dependant on soil conditions.
How can I use Chemclean?
Chemclean can be used for all types of cleaning including soaking, manual scrubbing and recirculation cleaning.
What is it the minimum contact time?
Contact time depends on the soil load but typically equipment can be soaked for up to 4 hours or used in a recirculation system for 30 minutes.
At what temperature should I use Chemclean?
Chemclean can be used hot or cold up to 60°C.
Can I store and re-use the diluted solution once it has been made up?
Chemclean will begin to dissociate after a few hours and will no longer be as effective however, you can reuse it to clean multiple pieces of equipment at the same time.
Always make up fresh Chemclean solution immediately before using it.
My Chemclean foams up a little, is this right?
Chemclean can foam up when agitated but the foam quickly collapses when left to settle.
Do I need to rinse Chemclean?
Yes, Chemclean is free rinsing and should be thoroughly rinsed off ideally with warm water before sanitising.